LOOK CYCLE ROAD PEDALS – KEO BLADE

6,500.0015,000.00

Clear

LOOK CYCLE


ROAD PEDALS:


(1) KÉO BLADE

120G TENSION 8 STAINLESS STEEL 400MM^2 COMPOSITE BODY

BLACK

(2) KÉO BLADE CARBON

110G TENSION 12 STAINLESS STEEL 700MM^2 CARBON BODY

BLACK

(3) KÉO BLADE CARBON T1

90G TENSION 16 STAINLESS STEEL 700MM^2 CARBON BODY

BLACK


(1) KÉO BLADE

The Blade body and blade are built from composite material. This substance makes the production of a range of less rigid blades possible   – 08 to 12 -, for a cleat engagement and release feel that falls between a metal spring and a carbon blade pedal.

The Blade brings together all the benefits of a blade pedal: crisper in and out clipping, better foot support for more security, aerodynamic shape and low weight (compared to a conventional spring system). The platform contact area has been enlarged, providing excellent pedaling stability.

Blade Technology

Blade technology uses a blade instead of a conventional metal spring, which has many advantages for the user:

• Safe cleat entry/ release: the blade flexes, providing a firm hold once clipped-in, and when clipping-out, releases the foot faster at the end of the process in a quick and secure movement.

• An aerodynamic shape: thanks to the integration of the blade inside the body, pedals equipped with BLADE technology have the best aerodynamic shape ever created.

• Low weight: the design of the pedal around a blade system allows a significant reduction in weight and better load distribution.

Spindle : More stability and better load distribution

The Blade Carbon pedal spindle was designed to obtain a very low stack height: only 13mm. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedaling and two spaced out ball bearings which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed.

Axle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction ).

LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

Contact surface area : Maximum power transfer

To answer the desires of some of the most demanding cyclists, notably competitors, the pedal and cleat system must allow efficient power transfer through a broad and rigid contact surface.

Because of this, the Blade Carbon platform surface is covered with a 64mm wide, stainless steel plate that has been molded into the body and optimizes, regardless of pedaling style, the over 400 mm² cleat/pedal contact area.

SPECIFICATIONS

USAGE: Regular rider to Competitive

BODY: Composite

AXLE: Chromoly steel +

THREADING: 9/16 X 20 mm

BEARINGS: 2 ball bearings, 1 needle bearing cartridge

PEDAL STACK HEIGHT

14 mm

DISTANCE PEDAL SPINDLE / CRANK ARM

53 mm

CONTACT SURFACE AREA

400 mm²

FLOAT

2 types of composite blades: 8 and 12

CLEATS

Kéo Grip Cleats Grey

ANGULAR MOVEMENT

0 °, 4.5 ° or 9 ° according to the cleat color (Black, Grey, Red)

PEDAL WEIGHT

120 gr (308 gr per pair with cleats and screws)

COLORS

Black or White

ACCESSORIES:A pair of Grey Kéo Grip cleats + screws

GUARANTEE:2 years


(2) KÉO BLADE CARBON / (3) KÉO BLADE CARBON T1

Designed to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.

Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.

The KEO BLADE CARBON has the best weight / power ratio in its class.

Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.

OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITY

The spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that passes through internal roller and needle bearings located directly under the pedal platform. This new construction saves approximately 2 watts at 100 rpm.

The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.

Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated endplug with an o-ring washer and has also been equipped with an internal, double-lipped seal.

LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

ULTRA-POWERFUL PLATFORM

To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.

The platform of the CARBON BLADE is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.

With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.

Its weight / power ratio positions it well above the competition

BODY AND BLADE CARBON TECHNOLOGY

Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.

BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUT

SPECIFICATIONS

USE: Race

BODY: Carbon

SPINDLE: Chromoly Steel + / TITANIUM

THREADING: 9/16 X 20 mm

BEARINGS: 1 roller bearing, 1 needle bearing

STACK HEIGHT: 14.8 mm

DISTANCE PEDAL SPINDLE / CRANKARM: 53 mm

PLATFORM WIDTH: 67 mm

PLATFORM SURFACE AREA: 700 mm²

TENSION:

(2) Pedals come installed with “12” carbon blades + additional “16” carbon blades (“20” carbon blades sold separately)

(3) Pedals come installed with “16” carbon blades + additional “12” carbon blades (“20” carbon blades sold separately)

CLEATS: Kéo Cleats-Gray

FLOAT: 0 °, 4.5 ° or 9 ° according to the cleat color (Black, Grey, Red)

PEDAL WEIGHT: 110 gr (288 gr per pair with cleats and screws) / 95g (248g per pair with cleats and screws)

COLORS: Black

ACCESSORIES: 2 sets of blades +1 pair of Kéo Cleats-Gray + screws

WARRANTY: 2 years


 

MATERIAL

COMPOSITE, CARBON, CARBON T1

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

The product has been added to your cart.

Continue shopping View Cart